Do you know the hardware accessories of women’s bags?

Luggage hardware accessories can be roughly classified as follows: material, shape, color, specification, etc.
material
Luggage hardware is divided into iron, copper, aluminum, zinc alloy and other die-casting hardware according to the material.
shape
Luggage hardware is divided into tie rods, small wheels, mushroom nails, strike nails, foot nails, hollow nails, sliders, corns, D buckles, dog buckles, needle links, belt buckles, chains, coils, locks according to specific product categories. , Magnetic buttons, various trademarks and decorative hardware. All kinds of hardware are divided into different categories according to function or shape. And all kinds of hardware accessories also have a lot of specifications
color
There are many colors of luggage hardware according to electroplating: white, gold, gun black, green bronze, green ancient sweep, chrome and so on. There are also many points to pay attention to in electroplating. Different electroplating colors have different process requirements. Exports should pay attention to whether they meet the requirements of environmental protection and non-toxicity, etc.
Luggage hardware production process
1. First of all, when a new product is delivered to the manufacturer, it is necessary to make a mold. The production of the mold is very critical. The first condition for a product to be delivered to the manufacturer is that the manufacturer must know how to make a mold, because if you don’t know how to make a mold, Not sure if this product can be made
2. The second step is to put the die-casting product on the die-casting machine to die-cast the product. Die-casting machines are divided into tonnage. Ordinary luggage hardware accessories generally use 25-ton die-casting machines. It is also very skillful to use die-casting machines to make products well. It depends on the skill of the master of the press. When the pressure is too high, the product will have many burrs and consume electricity. If the pressure is too small, there will be bumps on the surface of the product, and the surface of the product will be uneven. Therefore, the press master must control the machine to make the punch. Good product! After the product comes out, it needs to be broken.
3. Enter the third step of polishing, which is the most important link in the production process of luggage hardware accessories. Just like women’s jewelry, the shiny, bright and smooth are all because of high polishing and then electroplating. The shiny effect is actually the same as the production process of many hardware products such as jewelry, so the process of making things very smooth and shiny is to do a good job of polishing.
4. The fourth step is to put on the foot piece. Because the product is to be fixed on the bag, it is necessary to put on the iron wire foot piece. The iron wire is fixed on the foot piece by die-casting. In the past, it was pressed with a three-ton punch. It was changed to a mechanical bench drill to press down and fix it. All bench drills were used. The technology has also improved, and the production tools have also been changed! Another link is that some are screwed, so we need to tap out a screw hole, Here, the tapping machine is used again to tap a screw hole!
5. The popular point mentioned in the fifth step is to add color plating to the product! Electroplating here depends on the skill of the electroplating master. First, the impurities in the product area should be washed with sulfuric acid, and then the product should be primed with a bronze color. If the electroplating time is too long and not too short, it will be even worse. After the electroplating is completed, one product will be taken off the shelf and sent to the customer after being packaged!